Difference between revisions of "Compiling the Source Code"
m (→Compile Open Surge) |
m |
||
(One intermediate revision by the same user not shown) | |||
Line 44: | Line 44: | ||
=== Download Allegro 5 === | === Download Allegro 5 === | ||
− | Let's download Allegro 5 (source code). The most recent version of the library can be found at [http://liballeg.org liballeg.org]. You must use at least Allegro 5.2. | + | Let's download Allegro 5 (source code). The most recent version of the library can be found at [http://liballeg.org liballeg.org]. You must use at least Allegro 5.2.3. |
wget https://github.com/liballeg/allegro5/releases/download/5.2.5.0/allegro-5.2.5.0.tar.gz | wget https://github.com/liballeg/allegro5/releases/download/5.2.5.0/allegro-5.2.5.0.tar.gz | ||
Line 478: | Line 478: | ||
wine ~/opensurge/opensurge.exe | wine ~/opensurge/opensurge.exe | ||
+ | |||
+ | [[Category:Development]] |
Revision as of 00:59, 24 November 2020
Contents
- 1 Current version
- 1.1 Cross-compiling
- 2 Legacy version
Current version
This guide will help you compile Open Surge. Open Surge uses Allegro 5, a game programming library written mostly in C. Allegro 5 is supported on multiple platforms, such as: Windows, Linux and OSX. Regardless of your platform, you'll need CMake and a C compiler.
NOTE: you normally don't need to compile Open Surge from the source code, unless you're an advanced user or a package maintainer.
- If you're a package maintainer, it's recommended to create two separate packages for distribution: one for Open Surge and the other for SurgeScript. SurgeScript is a scripting language for games. It's conceived as a separate project by the same author, providing shared and static libraries, and it's used massively in Open Surge. SurgeScript features a runtime engine of its own that doesn't depend on Open Surge.
Cross-compiling
We'll compile a Windows build of the game from a Linux box. We'll first compile Allegro 5 and its dependencies. Next, we'll compile SurgeScript. Finally, we'll compile Open Surge.
Since we're building everything from the sources, the instructions below can be adapted to build the game on other platforms, such as Linux and OSX (there are hints throughout the guide). Also, if you came here from the web, this guide can help you cross-compile Allegro 5 as well.
NOTE: before we begin, create an empty directory for compiling the game and then get in there (cd /path/to/dir). We'll be downloading packages and installing things. Avoid using directories with whitespaces or special characters in the path.
Install the cross-compiler
First of all, we need to install CMake and the cross-compiler. We'll be using MinGW-w64. Get MinGW-w64 from its website and CMake from cmake.org. On Debian-based distributions such as Ubuntu, you can simply run:
sudo apt-get install mingw-w64 cmake
Now, check where the cross-compiler has been installed. Then, run the following commands in a shell (adapt as necessary):
# Name of the cross compiler # Usually one of the following: i686-w64-mingw32, i686-pc-mingw32, i386-mingw32 (32 bit) export TOOLSET=i686-w64-mingw32 # Location of the cross compiler # Usually in /usr (please check) - it should have subdirectories: bin/, include/, lib/ export TOOLCHAIN=/usr/$TOOLSET
We'll also set some environment variables. The programs below must be available in your PATH:
# These tools should be available in your PATH export CC=$TOOLSET-gcc export CXX=$TOOLSET-g++ export RANLIB=$TOOLSET-ranlib export LD=$TOOLSET-ld export AR=$TOOLSET-ar export AS=$TOOLSET-as export STRIP=$TOOLSET-strip
Download Allegro 5
Let's download Allegro 5 (source code). The most recent version of the library can be found at liballeg.org. You must use at least Allegro 5.2.3.
wget https://github.com/liballeg/allegro5/releases/download/5.2.5.0/allegro-5.2.5.0.tar.gz tar xvzf allegro-5.2.5.0.tar.gz cd allegro-5.2.5.0
In order to compile Allegro 5, we must first install its dependencies. We'll install the dependencies into a special folder called deps. This folder is secretly recognized by Allegro. Set the variables below:
export ALLEGRO_FOLDER="`pwd`" export ALLEGRO_BUILD_FOLDER="$ALLEGRO_FOLDER/build" export ALLEGRO_DEPS_FOLDER="$ALLEGRO_FOLDER/deps" export LDFLAGS="-L$ALLEGRO_DEPS_FOLDER/lib" export CFLAGS="-I$ALLEGRO_DEPS_FOLDER/include" export CPPFLAGS="-I$ALLEGRO_DEPS_FOLDER/include"
Let's create the deps folder:
mkdir -p $ALLEGRO_DEPS_FOLDER cd $ALLEGRO_DEPS_FOLDER
Now we're ready to compile the dependencies.
Compile zlib
zlib can be obtained from http://zlib.net
wget https://zlib.net/zlib-1.2.11.tar.gz tar xvzf zlib-1.2.11.tar.gz && cd zlib-1.2.11 # ./configure --prefix=$ALLEGRO_DEPS_FOLDER --static && make # skip this (not win32) sed -e s/"PREFIX ="/"PREFIX = ${TOOLSET}-"/ -i win32/Makefile.gcc BINARY_PATH=${ALLEGRO_DEPS_FOLDER}/bin \ INCLUDE_PATH=${ALLEGRO_DEPS_FOLDER}/include \ LIBRARY_PATH=${ALLEGRO_DEPS_FOLDER}/lib \ make -f win32/Makefile.gcc install make install cd ..
Compile libpng
libpng 1.6 can be obtained from http://libpng.org
wget https://downloads.sourceforge.net/project/libpng/libpng16/1.6.36/libpng-1.6.36.tar.gz tar xvzf libpng-1.6.36.tar.gz && cd libpng-1.6.36 ./configure --host=$TOOLSET --target=$TOOLSET --prefix=$ALLEGRO_DEPS_FOLDER --disable-shared --enable-static make make install cd ..
Compile freetype
The FreeType library can be obtained from http://freetype.org
wget http://downloads.sourceforge.net/project/freetype/freetype2/2.9.1/freetype-2.9.1.tar.gz tar xvzf freetype-2.9.1.tar.gz && cd freetype-2.9.1 ./configure --host=$TOOLSET --target=$TOOLSET --prefix=$ALLEGRO_DEPS_FOLDER --disable-shared --enable-static \ --without-png --without-zlib --without-harfbuzz --with-bzip2=no make make install cd ..
Compile libjpeg
We'll be using libjpeg: http://www.ijg.org/
wget https://www.ijg.org/files/jpegsrc.v9c.tar.gz tar xvzf jpegsrc.v9c.tar.gz && cd jpeg-9c ./configure --host=$TOOLSET --target=$TOOLSET --prefix=$ALLEGRO_DEPS_FOLDER --disable-shared --enable-static make make install cd ..
You may alternatively use libjpeg-turbo: http://libjpeg-turbo.org
Compile libogg
libogg can be obtained from http://xiph.org
wget http://downloads.xiph.org/releases/ogg/libogg-1.3.3.tar.gz tar xvzf libogg-1.3.3.tar.gz && cd libogg-1.3.3 # sed -e s/"-mno-ieee-fp"/""/g -i ./configure # skip this (clang only, x86) ./configure --host=$TOOLSET --target=$TOOLSET --prefix=$ALLEGRO_DEPS_FOLDER --disable-shared --enable-static make make install cd ..
Compile libvorbis
libvorbis can also be obtained from http://xiph.org
wget http://downloads.xiph.org/releases/vorbis/libvorbis-1.3.6.tar.gz tar xvzf libvorbis-1.3.6.tar.gz && cd libvorbis-1.3.6 # sed -e s/"-mno-ieee-fp"/""/g -i ./configure # skip this (clang only, x86) ./configure --host=$TOOLSET --target=$TOOLSET --prefix=$ALLEGRO_DEPS_FOLDER --disable-shared --enable-static \ --without-ogg --with-ogg=$ALLEGRO_DEPS_FOLDER --with-ogg-libraries=$ALLEGRO_DEPS_FOLDER/lib \ --with-ogg-includes=$ALLEGRO_DEPS_FOLDER/include make make install cd ..
Optional libraries
Other libraries such as: libflac, libdumb, libopus, libtheora can be added to Allegro, but are currently not required by Open Surge.
libopenal
libopenal is required on OSX, but optional otherwise. We'll be cross-compiling OpenAL Soft, a software implementation of the OpenAL API. It's available at https://kcat.strangesoft.net/
wget https://kcat.strangesoft.net/openal-releases/openal-soft-1.17.2.tar.bz2 tar xvjf openal-soft-1.17.2.tar.bz2 && pushd openal-soft-1.17.2/build cmake .. -DCMAKE_SYSTEM_NAME=Windows -DCMAKE_C_COMPILER=$(which $CC) -DCMAKE_CXX_COMPILER=$(which $CXX) \ -DCMAKE_FIND_ROOT_PATH=$TOOLCHAIN -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM=NEVER -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY \ -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY -DCMAKE_INSTALL_PREFIX=$ALLEGRO_DEPS_FOLDER -DLIBTYPE=STATIC make make install popd
Compile Allegro 5
In this tutorial, we'll compile the static version of Allegro 5 (monolith). YMMV, but we'll be using this configuration for the Windows build of the game. Note that other platforms may not support linking Allegro 5 statically.
export LDFLAGS="-static -static-libgcc -static-libstdc++" mkdir -p $ALLEGRO_BUILD_FOLDER cd $ALLEGRO_BUILD_FOLDER cmake .. -DCMAKE_TOOLCHAIN_FILE="$ALLEGRO_FOLDER/cmake/Toolchain-mingw.cmake" -DWANT_MONOLITH=on -DSHARED=off \ -DCMAKE_BUILD_TYPE=RelWithDebInfo -DWANT_DOCS=off -DWANT_EXAMPLES=off -DWANT_DEMO=on -DWANT_TESTS=off \ -DCMAKE_VERBOSE_MAKEFILE=on -DCMAKE_EXE_LINKER_FLAGS="-static -static-libgcc -static-libstdc++" # Cross fingers and pray. make -j`nproc` sudo make install
After compiling Allegro 5, go back to the base folder:
cd $ALLEGRO_FOLDER/.. export LDFLAGS=""
Compile SurgeScript
Compiling SurgeScript should be fairly easy. Get the sources at https://github.com/alemart/surgescript/releases File cmake/toolchain-mingw.cmake tries to automatically locate the cross-compiler (adapt if necessary).
# extract the sources to surgescript/ pushd surgescript mkdir -p build && cd build cmake .. -DCMAKE_TOOLCHAIN_FILE=../cmake/toolchain-mingw.cmake make sudo make install popd
You may install SurgeScript into a non-standard folder by modifying CMAKE_INSTALL_PREFIX (via the command-line or using ccmake | cmake-gui). However, we cover only the default setup in this guide.
Compile Open Surge
If everything went well so far, you're ready to build Open Surge! The sources are available at https://github.com/alemart/opensurge/releases Adapt file src/misc/toolchain-mingw.cmake if necessary.
# extract the sources to opensurge/ pushd opensurge mkdir -p build && cd build cmake .. -DCMAKE_TOOLCHAIN_FILE=../src/misc/toolchain-mingw.cmake \ -DCMAKE_SYSROOT=$ALLEGRO_DEPS_FOLDER -DALLEGRO_STATIC=ON -DALLEGRO_MONOLITH=ON -DSURGESCRIPT_STATIC=ON make # sudo make install # the Linux build uses this popd
The Open Surge executable will be available in the opensurge folder.
Legacy version
The instructions below help you compile the legacy version of Open Surge (0.2.0). These instructions are no longer applicable to the current version of Open Surge, but have been kept for historical purposes. Unlike the current version, the legacy version used Allegro 4.
Compiling on Windows
At some point you may want to compile the game/engine on your own, mostly if you are modifying the sources. From here on, when GAMEDIR is mentioned, it means only the directory where you unpacked the game. GAMEDIR stores, among other things, a readme.html page and a file called CMakeLists.txt.
Preparing the environment
We will first need two programs:
- CMake - Cross platform compiler - http://www.cmake.org/
- MinGW - Minimalist GNU for Windows - http://sourceforge.net/projects/mingw/
Download and install both of them, the latest versions. It will be better if you install MinGW in your C: disk, under C:\MinGW.
Also, make sure your CMake is installed with this option (or the one under) selected:
Setting the PATH
In order for the compiler to know where to get the liraries, we need to add two variables to your system; right-click on "My Computer", select "Properties", then "Advanced System Settings", and then "Environment Variables".
Now, in the lower box, we select the variable called "Path" and then click "Edit". If it doesn't exist, we should create it.
If it exists, add this at the end:
;C:\MinGW\bin;C:\MinGW\lib
If you're creating it, ignore the ; at the beginning and paste the rest. Give OK to all open dialog boxes.
Getting the dependencies
Now we should download all the dependencies. It is recommendable that you extract the files in an easy to read folder structure. For example, on a main folder called "src", extract each dependency to its separate folder.
Let's go to liballeg.org and download Allegro 4.4. Extract the contents of the file into the folder where we are going to keep the dependencies.
It is now recommended that we compile Allegro. To avoid any errors, we should go to the folder where Allegro was extracted, and delete the CMakeCache.txt file before compiling.
Now it's time to run CMake GUI.
Use this image as a reference on how to configure:
Now we need
- Modified Alfont - http://opensnc.sourceforge.net/alfont/
Make sure you follow the Generic installation instructions. For ease of access, here are the download links:
http://opensnc.sourceforge.net/alfont/AlFont209.rar (Original Alfont)
http://opensnc.sourceforge.net/alfont/alfont.c (Modified Alfont, conveniently prepared for download).
Now, after downloading and extracting the Original Alfont, replace alfont/src/alfont.c with the modified alfont.c you just downloaded.
Next, follow the compilation process described in alfont/README.txt: with a text editor, modify Makefile and set TARGET=MINGW32_STATIC
Now you should
- Compile Alfont.
After running make, copy alfont/lib/mingw32/libalfont.a and alfont/include/* to the MingW directories, normally C:/MingW/lib , and C:/MingW/include .
You should now be ready for the final step.
Compiling Open Surge
When using MinGW, make sure both lib\ and bin\ folders are listed on your PATH. If MinGW is installed on C:\MinGW\, simply open a Command Prompt (cmd) and type:
set PATH=%PATH%;C:\MinGW\bin;C:\MinGW\lib
On the same Command Prompt, please go to GAMEDIR and run the following commands:
cmake -G "MinGW Makefiles" . mingw32-make
Note that little '.' at the end of the first command. If everything works well, opensurge.exe will be in GAMEDIR.
Cross-compiling (advanced)
We'll learn how to compile the Windows version from a Linux box. This is more advanced and more complete (we show you how to compile everything, including the libs). You can adapt these instructions to compile Open Surge in other systems (particularly on *nix). If you came here from the web, you can follow these instructions to cross compile Allegro 4.4 as well:
Install MinGW
First of all, we need to install the cross-compiler. Get MinGW on its website or, on Debian-based distributions, simply run:
sudo apt-get install mingw-w64-i686-dev
Now, check where the cross-compiler has been installed. Then, run the following commands (adapt as necessary):
TOOLSET="i686-w64-mingw32" MINGDIR="/usr/i686-w64-mingw32"
Note: the 32-bit version of the compiler is required for Allegro 4.4.
Install CMake
Get CMake if you haven't yet. Download it on its website or, on Debian-based distributions, run:
sudo apt-get install cmake
We'll use this tool to help us compile some things.
Compile zlib
Compiling zlib is pretty straighforward:
wget https://zlib.net/zlib-1.2.11.tar.gz tar xvzf zlib-1.2.11.tar.gz cd zlib-1.2.11 sed -e s/"PREFIX ="/"PREFIX = ${TOOLSET}-"/ -i win32/Makefile.gcc make -f win32/Makefile.gcc sudo BINARY_PATH=${MINGDIR}/bin \ INCLUDE_PATH=${MINGDIR}/include \ LIBRARY_PATH=${MINGDIR}/lib \ make -f win32/Makefile.gcc install cd ..
Compile libpng
You'll need libpng version 1.2:
wget https://download.sourceforge.net/libpng/libpng-1.2.59.tar.gz tar xvzf libpng-1.2.59.tar.gz cd libpng-1.2.59 ./configure \ CC="${TOOLSET}-gcc" \ AR="${TOOLSET}-ar" \ STRIP="${TOOLSET}-strip" \ RANLIB="${TOOLSET}-ranlib" \ CFLAGS="-I${MINGDIR}/include/" \ LDFLAGS="-L${MINGDIR}/lib/" \ --disable-shared \ --target=$TOOLSET \ --host=$TOOLSET \ --prefix=$MINGDIR make sudo make install
Compile libogg
Run this:
wget http://downloads.xiph.org/releases/ogg/libogg-1.3.3.tar.gz tar xvzf libogg-1.3.3.tar.gz cd libogg-1.3.3 ./configure \ CC="${TOOLSET}-gcc" \ AR="${TOOLSET}-ar" \ STRIP="${TOOLSET}-strip" \ RANLIB="${TOOLSET}-ranlib" \ CFLAGS="-I${MINGDIR}/include/" \ LDFLAGS="-L${MINGDIR}/lib/" \ --disable-shared \ --target=$TOOLSET \ --host=$TOOLSET \ --prefix=$MINGDIR make sudo make install
Compile libvorbis
Run that:
wget http://downloads.xiph.org/releases/vorbis/libvorbis-1.3.6.tar.gz tar xvzf libvorbis-1.3.6.tar.gz cd libvorbis-1.3.6 ./configure \ CC="${TOOLSET}-gcc" \ AR="${TOOLSET}-ar" \ STRIP="${TOOLSET}-strip" \ RANLIB="${TOOLSET}-ranlib" \ CFLAGS="-I${MINGDIR}/include/" \ LDFLAGS="-L${MINGDIR}/lib/" \ --disable-shared \ --target=$TOOLSET \ --host=$TOOLSET \ --prefix=$MINGDIR make sudo make install
Install the DirectX SDK for MinGW
This will install the DirectX SDK for MinGW:
wget https://download.tuxfamily.org/allegro/files/dx70_mgw.zip sudo unzip -a -d$MINGDIR dx70_mgw.zip
Compile Allegro 4.4.2
To compile Allegro 4.4, first run:
wget https://github.com/liballeg/allegro5/releases/download/4.4.2/allegro-4.4.2.zip unzip -a allegro-4.4.2.zip cd allegro
In cmake/Toolchain-mingw.cmake, adjust CMAKE_C_COMPILER, CMAKE_CXX_COMPILER and CMAKE_FIND_ROOT_PATH to ${which i686-w64-mingw32-gcc}, ${which i686-w64-mingw32-g++} and $MINGDIR, respectively (evaluate these values yourself and write their paths on the toolchain file). Additionally, set CMAKE_RC_COMPILER to ${which i686-w64-mingw32-windres} and add the command link_libraries("-static-libgcc") to the file. The result will be like this:
# # Values to be placed in cmake/Toolchain-mingw.cmake # set(CMAKE_C_COMPILER /usr/bin/i686-w64-mingw32-gcc) set(CMAKE_CXX_COMPILER /usr/bin/i686-w64-mingw32-g++) set(CMAKE_FIND_ROOT_PATH /usr/i686-w64-mingw32) set(CMAKE_RC_COMPILER /usr/bin/i686-w64-mingw32-windres) link_libraries("-static-libgcc")
Then, run:
mkdir build && cd build cmake \ -DCMAKE_TOOLCHAIN_FILE=../cmake/Toolchain-mingw.cmake \ -DCMAKE_INSTALL_PREFIX=$MINGDIR \ -DWANT_EXAMPLES=ON \ -DWANT_ALLEGROGL=OFF \ .. make -j`nproc` sudo make install
You're done compiling Allegro! Additionally, run:
sudo ln -s $MINGDIR/lib/liballeg44.dll.a $MINGDIR/lib/liballeg.dll.a
Compile Modified Alfont 2.0.9
Compiling Modified Alfont is a bit more tricky. See its website for more information. Run the commands:
wget http://opensnc.sourceforge.net/alfont/AlFont209.rar unrar x AlFont209.rar cd alfont wget http://opensnc.sourceforge.net/alfont/alfont.c -O src/alfont.c sh ./fixunix.sh sed -e s/"TARGET=DJGPP_STATIC"/"TARGET=MINGW32_STATIC"/ -i Makefile sed -e s/"CC=gcc"/"CC=${TOOLSET}-gcc"/ -i Makefile make sudo install -m 755 lib/mingw32/libalfont.a ${MINGDIR}/lib sudo install -m 644 include/alfont*.h ${MINGDIR}/include
Compile Open Surge
If you've managed to come so far, congratulations. We're almost there!
Get the source code of the game and unpack it to $HOME/opensurge (for example). Then:
cd ~/opensurge mkdir build && cd build cmake \ -DCMAKE_SYSTEM_NAME=Windows \ -DCMAKE_FIND_ROOT_PATH=$MINGDIR \ -DCMAKE_RC_COMPILER=${TOOLSET}-windres \ -DCMAKE_C_COMPILER=${TOOLSET}-gcc \ -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY=ONLY \ -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE=ONLY \ .. make
If everything went well, the opensurge executable will be in the opensurge folder. Make sure to include the Allegro DLL in the folder:
cp $MINGDIR/bin/alleg44.dll ~/opensurge
That's it!
Testing
Optional: if you have wine installed in your system, you can test the executable by running
wine ~/opensurge/opensurge.exe